Sim'n Tonic Forums

Short description of the issue:
There is no DAW control option in Bitwig for midi input, but Nome II commands is available for midi output

Setup (devices connected and how):
Via USB and the U-Sync VST in instrument track

Nome generation (I or II) and Firmware version:
Nome II Firmware 4.6
U-Sync Daemon 1.3

Thank you for reporting!

This is a well-known issue which I cannot do anything about it. MacOS gets confused when a device's MIDI port names change.
It is mentioned in the Nome manual, but I will add it in the U-SYNC manual

To solve it:

1. Make sure you are on FW 4.6
2. Unplug all Sim'n Tonic Device
3. On you mac, open "Audio MIDI Setup"
4. In the "MIDI Studio" window, delete everything called Nome or Midronome

Section 6.1 of the U-SYNC Manual has been updated - I hope it is clearer

Thanks Simon for your reply. I can remember that I had to this some while ago. And.....IT WORKED!
Thanks a lot for the workaround. These settings and options are great new additions to the NOME II. Have fun with the coming new firwares.