Sim'n Tonic Forums

Hi, great feature! My suggrestion: 1. screen off after some time if Nome is stopped. 2. turn off after long press rotary controller. Now to wake it up or turn it on is a bit tricky. Considering that it doesn't have a battery and that it is disconnected from usb during transport (unexpected power on)...

I apologize. I missed it. Thanks.

1.Separate pedal type for each input Pedal type can be currently set to sustain or latching pedal. This setting is the same for both inputs (PEd and PE.2). It would be great to be able to set pedal type for each inputs separately (PEd and PE.2). With this possibility, I could use sustain pedal 1 to ...

Hi, I found the way to restart loop with one tap on external pedal :D : Using SUSTAIN pedal, set inP to PEd and PEd=PLA and then set PE.t=LAt (not SuS). Now each tme I tap on pedal, Nome detect as two taps and send stop folowing reset/srart. Tested wth Roland MC101 and it works. But PE.t=LAt is sett...

I post similar request here: https://forum.simntonic.com/viewtopic.php?p=2332#p2332. Case 1 (which is described in this topic): set tempo to 120bpm, Nome II would send half or double tempo sync. Case 2 (which is described in link above): tap tempo in eight notes, Nome II would set tempo in quarter n...

Yes this is possible. But the start/stop pedal will not do a resync unless you tap it twice as the first tap will stop the sequencers while the second tap will reset/start as you noticed yourself. I suggest you make a separate topic if you want that specific feature (i.e. adding a pedal mode which ...

To use both input (i.e. pedal 1) and 2 you need either a double pedal with a TRS plug, or a Y adapter TRS -> 2x TS. If I understood right: in case of inP=PEd I can use two pedals, in case if inP=PAd or P.A.d), I can use only one drum pad (combination of pad and another pedal is not supported despit...

Maybe, setting the master volume for audio click would be super handy, because currently Nome II have two settings for volume: Vo.1 for first beat and Vo.2 for other beats.

Hi, I would like to use Nome II in live performance to sync it with the band. Nome II would be connected to the sequencer with 1 to N bar loops. In case if the band change tempo, I can do it by tap tempo on external pedal but in some situations, I just need to sync Nome to the first note of the bar ...

I would like to nome II to follow the band's tempo in live by taping external pedal. I would like to tap tempo with external pedal in eighth notes but Nome II would send clock in quarter notes. One possibility would be to select a factor (-2...) in the Nome II settings that would multiply or divide ...

It would be great if Nome II would have build-in speaker to produce audio click.
Thanks.